Sale – Omicron CP CU1

Omicron CP CU1

Omicron CP CU1 is measures line impedances and k-factors on overhead lines and power cables.

Ground impedances can also be determined on large systems with the CP CU1, as well as touch and step voltages.

Mains frequency malfunctions do not influence the measurements, as the CPC 100 and CP CU1 use variable output frequencies for measurements. This enables extremely precise and reproducible measurement results.

This item is part of our rental fleet and will show signs of normal wear due to use. It has been regularly tested, maintained, and cleaned upon each rental return. Stock images are used on the website for listing purposes.

Line and ground test system – CPC 100

The CPC 100 is a multifunctional test set for primary assets.
When combined with the CP CU1 it covers the following tests:
Line impedances of overhead lines and power cables for
distance relay parameterization
Mutual coupling impedances between parallel lines
Ground impedances of large substations
(fall-of-potential or 3-point test)
Step and touch voltages
Reduction factor
Coupling of power lines into signal cable

Your benefits

High Accuracy: Frequency selectivemeasurement and digital filtering
Safety: Galvanic isolation and protectionfrom overvoltages
Light-weight and easy to handle
Intuitive reporting and assessment withdedicated templates
One unit for line and ground testing

Home Global Atlas sell Omicron CP CU1 with best quality product

Measurement advantages:

Tune your distance relay by performinga line impedance measurement
Safe and quick determination of Z1, Z0 and k-factors.
Mutual coupling Impedance
measurement between parallel lines

Personnel safety
In the event of a ground fault hazardous step and touch voltage can occur inside and outside of a substation. Ground tests prove the effectiveness of grounding systems and guarantee safety of people inside and outside the substation. A fall-of-potential measurement is usually performed to determine the condition of the entire ground grid. On top of that, step and touch voltages are measured at exposed
locations in order to ensure human safety